Zeiss KF 2 ICS Specifikace stáhnout pdf (Strana 83)

Operation

Axiostar plus Packing the mount Carl Zeiss

B 40-815 e 12/01 3-27

3.12 Axiostar plus - Packing the

mount

The portable case for the Axiostar plus can be

used to transport the basic Axiostar plus

equipment (stand with binocular tube 45° ICS,

Abbe condenser, mechanical stage, line cable,

dust cover).

• Before inserting the Axiostar plus into the

case, loosen the knurled screw on the stand

(3-17/9) by turning it by ¼, turn the

binocular tube 45°

ICS (3-17/6) around 180°

(eyepieces pointing backwards) and tighten

the knurled screw again.

• Open the four locks of the case and pull the

case cover (3-17/1) upwards to remove it

from the case floor (3-17/2).

• Insert microscope into the recess in the case

floor.

• Push rubber foam component (3-17/4) over

the condenser (3-17/5) and move the

condenser upwards until it contacts the

rubber foam component.

• Pull the binocular tube (3-17/6) completely

apart and slide the rubber foam component

(3-17/7) between the eyepiece tubes until

stop. It might be necessary to apply some

pressure on the rubber foam component

until the holding flaps (3-17/8) are flush

with the upper stand part.

• Line cable, dust cover and any small

accessories can be placed on the case floor

beside the stand and fixed in position using

the Velcro fasteners (3-17/3).

• Attach the case cover, close the locks with a

snap and, if required, lock them with the

enclosed key.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 99 100

Komentáře k této Příručce

Žádné komentáře