Zeiss KF 2 ICS Specifikace stáhnout pdf (Strana 48)

Start-Up

Carl Zeiss Attaching epi-fluorescence illuminator Axiostar plus

2-26 B 40-815 e 12/01

• Hold the new burner on the labeled metal

base and place it in the heat sink so that

the reflective portion of the burner points

down when placed in the lamp frame. If

both sides are reflective, make sure that the

electrode labeled “UP“ is at the top. If there

is a sideways reflective melting position on

the burner, it must point to the side in

relation to the beam path.

• Carefully tighten clamping screw on the

heat sink.

Avoid getting fingerprints on the glass

components of the burner. If fingerprints do

occur, remove immediately.

• Press down spring handle (2-23/4) and

place burner with heat sink into the lamp

frame (2-23/5). Make sure to touch only the

heat sink.

• Slowly let go of spring handle and release

heat sink.

The heat sink must be parallel to the lamp base.

To aling, press spring handle and turn heat sink

with burner in the lamp frame.

• Replace lamp housing and tighten clamping

screws (2-23/1). Make a note of the

number on the operational hours counter.

Change the burner after reaching the expected

life of 100 hours.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 99 100

Žádné komentáře

Zeiss KF 2 ICS Specifikace Strana 48