Zeiss KF 2 ICS Specifikace stáhnout pdf (Strana 36)

Start-Up

Carl Zeiss Attaching condensers Axiostar plus

2-14 B 40-815 e 12/01

1 Condenser carrier

2 Spring pin

3 Centering screws

4 Groove

5 Orientation screw

6 Aperture diaphragm lever

7 Condenser

Fig. 2-12 Attaching Abbe condenser 0.9/1.25

1 Condenser

2 Guiding slot

3 Slider for phase contrast or darkfield

4 Orientation screw

Fig. 2-13 Inserting slider for phase contrast

or darkfield

2.8 Attaching condensers

2.8.1 Attaching Abbe condenser

0.9/1.25

• Unscrew both centering screws (2-12/3) on

the condenser carrier (2-12/1) until the

Abbe condenser 0.9/1.25 (2-12/7) can be

easily inserted into the condenser carrier.

• Insert the condenser into the condenser

carrier in such a way that

1. the dovetail of the condenser is pressed

against the spring pin (2-12/2) in the

condenser carrier and

2. the orientation screw (2-12/5) on the

underside of the condenser enters the

groove (2-12/4) on the condenser

carrier.

• Tighten both centering screws (2-12/3) on

the condenser carrier (2-12/1) until they

engage in the dovetail and keep the

condenser (2-12/7) in position.

2.8.2 Inserting slider for phase

contrast or darkfield

• Insert the slider (2-13/3) until it engages in

the opening in the condenser (2-13/1); the

orientation screw (2-13/4) must face

upwards and engage in the guiding slot

(2-13/2).

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Komentáře k této Příručce

Žádné komentáře